Page 24 © 2002, ADTRAN, Inc. 64200600L1#T-31A
Total Access 600R User Interface Guide (UIG)
SYSTEM CONFIG>TELNET USER LIST>AUTHEN METHOD
The user can be authenticated by selecting:
The factory default is
password.
SYSTEM CONFIG>TELNET USER LIST>PASSWORD
When the authenticating method is password, this text string is used for the password. You can enter up to 15 characters
in this field. The factory default is no entry in this field
.
SYSTEM CONFIG>TELNET USER LIST>IDLE TIME (MINS)
This sets the amount of time in minutes you can be idle before you are automatically logged off. The factory default
is
10 MINUTES
.
The range is
1-255 MINUTES
.
SYSTEM CONFIG>TELNET USER LIST>LEVEL
This is the security level granted to the user. The table below gives a brief description of each level. The factory default
is
0.
SYSTEM CONFIG>TELNET IP ACCESS LIST
SYSTEM CONFIG>TELNET IP ACCESS LIST>NETWORK ADDRESS AND MASK
This is a list of allowed telnet managers. Enter a network address and subnet mask from which telnet access to the
Total Access 600R is allowed. When a remote unit requests telnet access to the Total Access 600R, if the access list
is empty or the remote’s IP address matches a list entry, remote access is granted. A subnet mask of 0.0.0.0 will allow
any host telnet access, regardless of the network address. A network address of 0.0.0.0 with a corresponding netmask
of 255.255.255.255 will disallow any host telnet access.
The factory default is 0.0.0.0 for both parameters, which will allow all users telnet IP access.
P
ASSWORD
The Password field is used to authenticate the user.
RADIUS
The Radius client is used for authenticating the user.
Select level... If you want the user to....
5 Have read-only permission for all menu items - minimum rights
4 Have read permission for all menu items and permission to use test commands
3
Have access to all commands except passwords, flash download,
authentication methods, interface configurations, and telnet security levels.
2
Have access to all commands except passwords, flash download,
authentication methods, and telnet security levels.
1 Have access to all commands except passwords and telnet security levels.
0
Have permission to edit every menu item, including creating and editing
passwords -- maximum rights
Router Only Have read access to all menu items and write access to only the router menu.