ADTRAN 600R Network Router User Manual


 
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 33
Total Access 600R User Interface Guide (UIG)
ROUTER>CONFIG>GLOBAL>IP
This parameter is used for general IP configuration.
Mode
This item controls the
G
LOBAL
option for IP routing. The choices are
O
N
and
O
FF
.
The default is
O
N
.
Static Routes
Use this menu to enter static routes to other networks
.
DHCP Server
Use this menu to set up the DHCP server.
DNS
Enter the 600R's domain name and the DNS servers in this menu.
A
CTIVE
Adds this static route entry to the IP routing table when set to
Y
ES
and
removes it (if it was previously added) if set to
N
O
. Default is
Y
ES
.
IP ADDRESS
The IP address of the host or network address of the device being routed
to. Default is
0.0.0.0
.
S
UBNET
M
ASK
Determines the bits in the previous IP address that are used. If this is to be
a host route, it must be set to all ones (255.255.255.255). Default is
0.0.0.0
.
G
ATEWAY
The IP address of the router to receive the forwarded IP packet. Default is
0.0.0.0
.
HOPS
The number of router hops required to get to the network or host.
Maximum distance is 16 hops. Default is 1.
PRIVATE
When set to
N
O
, the 600R will advertise this static route using RIP. Setting
to
Y
ES
means that the route is kept private. Default is
N
O
.
DHCP M
ODE
When set to
O
N
, the 600R acts as a DHCP server and will dynamically
assign IP, network mask, default gateway, and DNS addresses to any
device which transmits a broadcast DHCP request. The addresses as-
signed are based on the 600R’s own IP address and will be within the
same network. Default is
O
FF
.
DHCP R
ENEWAL
T
IME
(
HOURS
)
The number of hours that the DHCP server should allow the device
before it is required to send a new DHCP request. The range is
0-255
.
The default is
15
hours, and
0
represents an infinite lease.
D
OMAIN
N
AME
Text string used to represent the domain name used by the
Total Access 600R.
S
ERVER
1
First server to which domain name requests are sent. Default is
0.0.0.0
.
S
ERVER
2
Server used as a backup, in case the primary address does not respond
to the request. Default is
0.0.0.0
.