Filter
Top Products
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 51
Total Access 600R User Interface Guide (UIG)
PRIVATE
A
DDRESS
M
ODE
This option is only available when
NAT P
ORT
T
RANSLA
-
TION
is enabled. The private IP address can be specified
to steer certain protocols and ports to specific servers in
the private network. Likewise, internal hosts can be
steered to certain servers on the public network. A new
request from the public network matching this entry’s
public parameters will be dropped if this mode is set to
A
NY
I
NTERNAL
. Choices are S
PECIFIED
and A
NY
I
NTERNAL
. Default is A
NY
I
NTERNAL
.
P
RIVATE
A
DDRESS
This option is only available when
NAT P
ORT
T
RANSLA
-
TION
is enabled and
P
RIVATE
A
DDRESS
M
ODE
is set to
S
PECIFIED
. Default is 0.0.0.0.
P
RIVATE
P
ORT MODE
This option is only available when
NAT P
ORT
T
RANSLA
-
TION
is enabled. However, it will not be available if
P
ROTOCOL
M
ODE
is set to ICMP; A
NY
(TCP, UDP,
OR
ICMP); A
LL
; S
PECIFIED
; or N
ONE
.
The private destination port associated with this entry
can be specified to add more control over certain types
of traffic. Leave as A
NY
P
ORT
to cover all port types.
Choices are A
NY
P
ORT
and S
PECIFIED
. Default is A
NY
P
ORT
.
P
RIVATE
P
ORT
This option is only available when
NAT P
ORT
T
RANSLA
-
TION
is enabled and
P
RIVATE
P
ORT
M
ODE
is set to S
PEC
-
IFIED
. However, it will not be available if
P
ROTOCOL
M
ODE
is set to ICMP; A
NY
(TCP, UDP,
OR
ICMP);
A
LL
; S
PECIFIED
; or
N
ONE
. Default is 0 (decimal).
T
RANSLATE
B
ODY
This option is only available when
NAT P
ORT
T
RANSLA
-
TION
is enabled. When set to
Y
ES
, the application pay-
load in the packet is scanned for occurrences of the
private/public IP address in binary or ASCII form. Set
this to
No
(default) for applications where this will
cause problems.
NAT V
IEW
Shows the protocols that are actively being translated.
P
RIV
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the private address of the host that the entry is
used for.
P
UB
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the public address this entry is using for its
NAPT.
S
ERV
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This is the destination of the packet.
P
ROTO
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the protocol used (
TCP, UDP, ICMP
, etc.).
P
RIV
P
ORT
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This is the private port used for the entry.
S
POOF
P
ORT
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. If the same private port is already used in the table, it will
spoof a different port for the entry.