Filter
Top Products
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 43
Total Access 600R User Interface Guide (UIG)
PRIVATE
A
DDRESS
M
ODE
This option is only available when
NAT P
ORT
T
RANS
-
LATION
is enabled. The private IP address can be speci-
fied to steer certain protocols and ports to specific
servers in the private network. Likewise, internal hosts
can be steered to certain servers on the public network.
A new request from the public network matching this
entry’s public parameters will be dropped if this mode
is set to A
NY
I
NTERNAL
. Choices are S
PECIFIED
and
A
NY
I
NTERNAL
. Default is A
NY
I
NTERNAL
.
P
RIVATE
A
DDRESS
This option is only available when
NAT P
ORT
T
RANS
-
LATION
is enabled and
P
RIVATE
A
DDRESS
M
ODE
is set to
S
PECIFIED
. Default is 0.0.0.0.
P
RIVATE
P
ORT MODE
This option is only available when
NAT P
ORT
T
RANS
-
LATION
is enabled. However, it will not be available if
P
ROTOCOL
M
ODE
is set to ICMP; A
NY
(TCP, UDP,
OR
ICMP); A
LL
; S
PECIFIED
or N
ONE
.
The private destination port associated with this entry
can be specified to add more control over certain types
of traffic. Leave as A
NY
P
ORT
to cover all port types.
Choices are A
NY
P
ORT
and S
PECIFIED
. Default is
A
NY
P
ORT
.
P
RIVATE
P
ORT
This option is only available when
NAT P
ORT
T
RANS
-
LATION
is enabled and the
P
RIVATE
P
ORT
M
ODE
is set to
S
PECIFIED
. However, it will not be available if
P
ROTO
-
COL
M
ODE
is set to ICMP; A
NY
(TCP, UDP,
OR
ICMP); A
LL
; S
PECIFIED
or N
ONE
. Default is 0 (deci-
mal).
T
RANSLATE
B
ODY
This option is only available when
NAT P
ORT
T
RANS
-
LATION
is enabled. When set to
Y
ES
, the application
payload in the packet is scanned for occurrences of the
private/public IP address in binary or ASCII form. Set
this to
No
(default) for applications where this will
cause problems.
NAT V
IEW
Shows the protocols that are actively being translated.
P
RIV
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the private address of the host that the entry is
used for.
P
UB
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the public address this entry is using for its
NAPT.
S
ERV
A
DDR
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This is the destination of the packet.
P
ROTO
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This shows the protocol used (
TCP, UDP, ICMP
, etc.).
P
RIV
P
ORT
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. This is the private port used for the entry.
S
POOF
P
ORT
This option is only available when
NAT P
ORT
T
RANSLATION
is en-
abled. If the same private port is already used in the table, it will
spoof a different port for the entry.