1-2 Chapter1
Installing Your Analyzer
Introduction
Introduction
This chapter shows you how to install your analyzer and confirm the correct operation, by
following the steps below:
• STEP 1. Verify the Shipment on page 1-3
• STEP 2. Familiarize Yourself with the Analyzer Front and Rear Panels on page 1-5
• STEP 3. Meet Electrical and Environmental Requirements on page 1-7
• STEP 4. Configure the Analyzer on page 1-9
• STEP 5. Verify the Analyzer Operation on page 1-20
• STEP 6. Back Up the EEPROM Disk on page 1-26