Filter
Top Products
Chapter 26: Software/Configuration Updates
332
Download or Upload a Configuration File via TFTP
This section describes how to upload or download a configuration file
using TFTP on an TFTP server. Before you upload or download a
configuration file onto the switch using TFTP, note the following:
Your network must have a TFTP server.
You must specify the path to the configuration file on the TFTP server.
Start the TFTP server software before you begin the download
procedure.
To upload or download an AT-S111 configuration file onto the switch using
a TFTP server, perform the following procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select the Config File Upload/Download
folder.
The Config File Upload/Download folder expands.
3. From the Config File Upload/Down folder, select via TFTP.
The Configuration Upload/Download via TFTP Page is displayed. See
Figure 131.
Figure 131. Configuration Upload/Download via TFTP Page
Configuration
File Upload
To upload an AT-S111 configuration file onto the switch, perform the
following procedure:
1. Enter the IP address of the TFTP server in the field next to the TFTP
Server IP parameter.
2. Select the Upload button.
3. The software immediately begins to upload the configuration file from
the switch to the TFTP server.