Filter
Top Products
AT-GS950/48PS Switch Web Interface User’s Guide
345
Figure 136. Factory Default Reset/Reboot Page with Password Entry
5. Enter the same password that you defined when you previously set the
Factory Default Reset field to Disable.
6. Click Apply.
The initial Factory Default Reset/Reboot Page is displayed with the
Factory Default Reset field Enabled. See Figure 133 on page 338.
In the Reboot section, the Reboot Type field now includes the options
presented in its pull down menu for returning the switch configuration
to the factory default values. See “Configure Factory Default Values”
on page 340 for more information.
7. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.