Filter
Top Products
AT-GS950/48PS Switch Web Interface User’s Guide
41
System Time
The procedures in this section describe how to configure the system time
by manually entering the time or through SNTP and how to configure the
daylight savings time feature. See the following sections:
“Manually Setting System Time” on page 41
“Setting SNTP” on page 42
“Setting Daylight Savings Parameters” on page 43
Manually Setting
System Time
To set the system time manually, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select System Time.
The System Time Page is displayed. See Figure 11.
Figure 11. System Time Page
3. Use the pull down menu to set the Clock Mode parameter to
Local time.