Filter
Top Products
Configure VRF-lite | Page 65
Configuring a complex inter-VRF solution
hostname shared_router
!
vlan database
vlan 2-4 state enable
!
interface port1.0.2
switchport access vlan 2
!
interface port1.0.3
switchport access vlan 3
!
interface port1.0.4
switchport access vlan 4
!
interface vlan1
ip address 192.168.100.2/24
!
interface vlan2
ip address 192.168.43.1/24
!
interface vlan3
ip address 192.168.44.1/24
!
interface vlan4
ip address 192.168.45.1/24
!
ip route 0.0.0.0/0 192.168.100.1
!
shared_router#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.100.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.100.1, vlan1
C 192.168.43.0/24 is directly connected, vlan2
C 192.168.44.0/24 is directly connected, vlan3
C 192.168.45.0/24 is directly connected, vlan4
C 192.168.100.0/24 is directly connected, vlan1
shared_router#