Filter
Top Products
Configuring a complex inter-VRF solution
Page 68 | Configure VRF-lite
hostname blue_rip_peer
!
vlan database
vlan 2-3 state enable
!
interface port1.0.2
switchport access vlan 2
!
interface port1.0.3
switchport access vlan 3
!
interface vlan1
ip address 192.168.30.2/24
!
interface vlan2
ip address 192.168.17.1/24
!
interface vlan3
ip address 192.168.18.1/24
!
router rip
network 192.168.30.0/24
redistribute connected
!
blue_rip_peer#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.30.1 to network 0.0.0.0
R* 0.0.0.0/0 [120/2] via 192.168.30.1, vlan1, 00:00:02
R 5.5.5.5/32 [120/2] via 192.168.30.1, vlan1, 00:00:02
C 192.168.17.0/24 is directly connected, vlan2
C 192.168.18.0/24 is directly connected, vlan3
C 192.168.30.0/24 is directly connected, vlan1
R 192.168.45.0/24 [120/2] via 192.168.30.1, vlan1, 00:00:02
R 192.168.100.0/24 [120/2] via 192.168.30.1, vlan1, 00:00:02
blue_rip_peer#