Filter
Top Products
Configuring a complex inter-VRF solution
Page 66 | Configure VRF-lite
hostname red_ospf_peer
!
vlan database
vlan 2-3 state enable
!
interface port1.0.2
switchport access vlan 2
!
interface port1.0.3
switchport access vlan 3
!
interface vlan1
ip address 192.168.10.2/24
!
interface vlan2
ip address 192.168.13.1/24
!
interface vlan3
ip address 192.168.14.1/24
!
router ospf 1
ospf router-id 192.168.10.2
network 192.168.10.0/24 area 0
redistribute connected
!
red_ospf_peer#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.10.1 to network 0.0.0.0
O*E2 0.0.0.0/0 [110/10] via 192.168.10.1, vlan1, 00:00:07
O E2 5.5.5.5/32 [110/1] via 192.168.10.1, vlan1, 00:00:07
C 192.168.10.0/24 is directly connected, vlan1
C 192.168.13.0/24 is directly connected, vlan2
C 192.168.14.0/24 is directly connected, vlan3
O E2 192.168.43.0/24 [110/1] via 192.168.10.1, vlan1, 00:00:07
O E2 192.168.100.0/24 [110/1] via 192.168.10.1, vlan1, 00:00:07
red_ospf_peer#