Filter
Top Products
Site Requirements - Page 1
990-7164-001
Site Requirements
Operating Space Requirements
The Symmetra
TM
is 23.5” (60cm) wide, and 27.5” (70cm) deep. No space is required on the sides of the
Symmetra
TM
frame.
Rear Clearance
n A minimum of 12" (30 cm) of clearance is required behind the frame for adequate airflow.
n The system enable switch must remain accessible.
n The back of the Symmetra
TM
must be accessible for the electrician to install wiring.
Front Clearance
n A minimum of 48" (122 cm) of clearance is required in front of the frame.
n The PowerView interface must remain accessible.
n The front of the Symmetra
TM
must be accessible to install and replace power and battery modules.
n The voltage transformer in the SYMINIF and SYMSTRF models emits an electro magnetic field (EMF)
that can interfere with the normal function of a computer monitor. Do not install these models in
close proximity to a computer monitor. The EMF is not of sufficient magnitude to cause interference
with other equipment.
Notice!