Filter
Top Products
Site Requirements - Page 3
990-7164-001
Environmental Requirements
Install Symmetra
TM
in a temperature controlled, clean, dry, and protected indoor area that is free of conductive
contaminants. The environment must have adequate airflow, and be free of corrosive fumes.
noitidnoClatnemnorivnE egnaRelbatpeccA
erutarepmeT)C°04-C°0(F°401-F°23
ytidimuHevitaleRgnisnednoc-non%59-0
noitavelE )m840,3ot0(levelaesnaemevobateef000,01ot0
Heat Output
Heat output of the Symmetra
TM
is significantly increased when batteries are charging. Battery recharge periods
are relatively infrequent.
artemmyS
MT
tnenopmoC
tuptuOUTB
)degrahCseirettaB(
tuptuOUTB
)gnigrahCseirettaB(
htroN
naciremA
sledoM
FINIMYS
314,3076,8
DP-FINIMYS
FRTSMYS
628,6046,51
DP-FRTSMYS
lanoitanretnI
sledoM1:1
IFINIMYS123,2875,7
IFRTSMYS
246,4654,31
ledoM1:3
I3FRTSMYS
Short-Term Battery Module Storage Requirements
Battery modules must be temporarily stored until the electrical wiring is connected and the Symmetra
TM
is
ready to be powered.
n Batteries should be stored at 0°F to 77°F (-18°C to 25°C) to preserve battery life.
n Storage environment can be within 0 to 100% relative humidity , non-condensing.
Note: Condensation will cause corrosion of electronic and chassis parts.
n Installing battery modules in a Symmetra
TM
that is not powered will discharge the batteries and could
damage them permanently. Do not install battery modules into the Symmetra
TM
frame until after the
electrical wiring connections have been made, and the system is ready to be powered.
Caution!