Filter
Top Products
Receiving and Unpacking - Page 3
990-7165-001
Unpacking the Symmetra
TM
Frame
1. Remove packaging materials and the grill covers. Use care to prevent scratching the surface of the frame.
2. Locate the pallet ramp that is shipped beneath the top corrogated shipping cover.
3. Follow the steps below to remove the frame from the pallet. After unpacking, carefully roll the Symmetra
TM
to
the installation site. It is now ready to be wired.
n Two people are required to remove the frame from the pallet.
n All four leveling feet at the base of the Symmetra
TM
frame must be fully retracted before rolling the frame
from the pallet.
n If rolling the frame on the casters over objects such as door thresholds or floor irregularities, be careful to
prevent the frame from tipping.
Caution!