Filter
Top Products
Start-Up Procedure - Page 3
990-7167-001
Battery Module Installation
1. With one person on each side of a battery module, align the runners of a battery module with the alignment
grooves in the bottom module bay. Carefully slide the battery module into the frame until the retaining
flange passes through the frame notch.
2. One person can now firmly push the battery module into the frame until the “drop-lock” engages.
3. Follow this procedure to install all battery modules.
n The 120V, 7.2 Ah battery module constitutes a risk of electrical shock and an energy hazard. High short
circuit current through conductive materials could cause severe burns. Before handling battery mod-
ules, remove conductive jewelry such as chains, wrist watches and rings.
n Battery modules weigh approx. 60 lb (27 kg). Two people are required to handle battery modules.
n Always install battery modules in the lowest available bay. When removing modules, start from the
highest level and work down.
Warning!