Filter
Top Products
22Switched Rack PDU User Guide
date
Access: Administrator only
Definition: Configure the date used by the Rack PDU.
To configure an NTP server to define the date and time for the Rack PDU, see “Set the Date and Time”
on page 98.
Example 1: To display the date using the format yyyy-mm-dd, type:
date -f yyyy-mm-dd
Example 2: To define the date as October 30, 2009, using the format configured in the preceding
example, type:
date -d “2009-10-30”
Example 3: To define the time as 5:21:03 p.m., type:
date -t 17:21:03
delete
Access: Administrator only
Description: Delete a file in the file system.
dir
Access: Administrator, Device User, Outlet User
Description: View the files and folders stored on the Rack PDU.
Option Argument Description
-d <“datestring”> Set the current date. Use the date format specified by the date -f
command.
-t <00:00:00> Configure the current time, in hours, minutes, and seconds. Use the 24-hour
clock format.
-f mm/dd/yy |
dd.mm.yyyy |
mmm-dd-yy |
dd-mmm-yy |
yyyy-mm-dd
Select the numerical format in which to display all dates in this user interface.
Each letter m (for month), d (for day), and y (for year) represents one digit.
Single-digit days and months are displayed with a leading zero.
-z <time zone offset> Set the difference with GMT in order to specify your time zone. This enables
you to synchronize with other people in different time zones.
Argument Description
<file name> Type the name of the file to delete.