Filter
Top Products
Switched Rack PDU User Guide25
ping
Access: Administrator, Device User
Description. Determine whether the device with the IP address or DNS name you specify is connected
to the network. Four inquiries are sent to the address.
Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the
network, type:
ping 150.250.6.10
portSpeed
Access: Administrator
Description:
Example:
To configure the TCP/IP port to communicate using 100 Mbps with half-duplex
communication (communication in only one direction at a time), type:
portspeed -s 100H
prompt
Access: Administrator, Device User
Description: Configure the command line interface prompt to include or exclude the account type of
the currently logged-in user. Any user can change this setting; all user accounts will be updated to use the
new setting.
Example: To include the account type of the currently logged-in user in the command prompt, type:
prompt -s long
quit
Access: Administrator, Device User, Outlet User
Description: Exit from the command line interface session (this works the same as the exit command).
Argument Description
<IP address or DNS name> Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS name
configured by the DNS server.
Option Arguments Description
-s auto | 10H | 10F |
100H | 100 F
Define the communication speed of the Ethernet port. The auto command
enables the Ethernet devices to negotiate to transmit at the highest possible
speed. See “Port Speed” on page 83 for more information about the port speed
settings.
Option Argument Description
-s long The prompt includes the account type of the currently logged-in user.
short The default setting. The prompt is four characters long: APC>