Filter
Top Products
Network Management Card User’s Guide 8
Control Console
Main Screen
Example Main
screen
The following is an example of the screen that appears when you log
into the Control Console.
Status and
identification
information
The following information is provided at the top of the main screen:
• Two fields identify the APC operating system (
AOS
) and
application (
APP
) firmware versions. The application firmware
uses a name that identifies the type of UPS that the
Management Card connects to the network. In th
e example
above, the
Management Card
uses the application firmware for a
UPS in the
Smart-UPS/Matrix-UPS family, in this case, a Smart-
UPS 450.
Network Management Card AOS v1.0.0.u
Smart UPS & Matrix UPS APP v1.0.0.r
• Three fields identify the system
Name
,
Contact
, and
Location
values.
Name : Writer1
Contact : JKing
Location : User Ed Department
Note: For information about how to set the
Name
,
Contact
,
and
Location
values, see System Menu on page 22.
•An
Up Time
field reports how long the Management Card has
been running since it was last turned on or reset.
Up Time : 1 Day 22 Hours 52 Minutes
&RQWLQXHGRQQH[WSDJH