Filter
Top Products
Network Management Card User’s Guide 25
System Menu
Option Settings FRQWLQXHG
Tools
Use this option to reboot the Management Card or to reset some or all
of its configuration settings to their original, default values.
Preferences
Use this option, which is available in the Web Interface only, to define
whether temperature values are displayed as
Fahrenheit
or
Celsius
in
the Web Interface and the Control Console.
Links
Use this Web Interface-only option to modify the
User Links
that appear
in the menu frame’s
Links
menu, or the
Access Links
setting that
defines the URL addresses used by the APC logo.
$FWLRQ 'HILQLWLRQ
Reboot Card
Restarts the Management Card.
Reset Card to Defaults
Resets all configuration settings.
Note: This resets the
TCP/IP
settings and enables
BOOTP
. The Management Card will not be able
to operate on the network until its
TCP/IP
settings are redefined.
Reset Card to Defaults
Except TCP/IP
Resets all configuration settings except the
TCP/IP and
BOOTP
settings.
XMODEM (Control
Console only)
Allows you to download firmware using a
terminal-emulation program when you use a
local connection to the Control Console only.
For more information about how you
connect to the Control Console locally, see
Local (Serial) access on page 6
.
6HWWLQJ 'HILQLWLRQ
User Links
Name
Defines the link names that appear in the
Links
menu (by
default,
Test Drive Demo
,
Remote Monitoring
, and
APC
Web Site
).
URL
Defines the URL addresses used by the links. By default,
the following URL addresses are used:
http://testdrive.apc.com (
Test Drive Demo
)
http://rms.apc.com (
Remote Monitoring
)
http://www.apc.com (
APC Web Site
)
Note: For information about these pages see Links menu
on page 17.
Access Links
APC Home Page
Defines the URL address used by the APC logo at the top
of all Web Interface pages (by default, http://
www.apc.com).