Filter
Top Products
Network Management Card User’s Guide 49
Events Menu
Event Recipients
Overview
The Web Interface and Control Console both have options that allow
you to define the trap receivers and up to four Email addresses to be
used when an event occurs that has the SNMP traps or Email enabled,
as described in Event Actions (Web Interface only) on page 47.
Trap Receivers
The
Trap Receiver
settings allow you to define which of up to four
specific NMSs will be sent traps.
Note: In the Control Console, these settings are accessed through the
SNMP
option in the
Network
menu.
Email options
See Email Feature on the next page.
,WHP 'HILQLWLRQ
Community Name
This setting defines the password
(maximum of 15 characters) used when
traps are sent to the
NMS
identified by the
Receiver NMS IP
setting.
Receiver NMS IP
Identifies the NMS that will be sent traps
by its IP address. If this setting is
0.0.0.0
(the default value), traps will not be sent to
any NMS
.
Trap Generation
Enables (by default) or disables the
sending of any traps to the
NMS
identified
the
Receiver NMS IP
setting.
Authentication Traps
Enables or Disables the sending of
authentication traps to the
NMS
identified
the
Receiver NMS IP
setting
.