Filter
Top Products
Network Management Card User’s Guide 53
Events Menu
How to Configure Individual Events
“Event List” page
The
Actions
option in the
Events
menu opens the “Event Actions
Configuration” page. You use the
Details
button in this page to
accesses a complete list of the Management Card (System events),
UPS, and Environmental Monitor (Environment events) that can be
reported by your Management Card.
Each event is identified by its unique code, its description, and its
assigned severity level, as shown in the following examples.
Note: For information about severity levels and how they define the
actions associated with events, see Event Actions (Web
Interface only) on page 47.
“Detailed Event
Action
Configuration”
page
The event codes provide a link to a page that allows you to do the
following:
• Change the selected event’s severity level.
• Enable or disable whether the event uses the event log, SNMP
traps, or Email notifications.
• Enable or disable whether the event uses the APC Remote
Monitoring Service, if you have signed up for this service.
Note: Change this setting only when a manual reconfiguration
is needed. For more information about the APC Remote
Monitoring Service available, use the
Remote
Monitoring
link in the Menu frame to access the “APC
Remote Monitoring Service” page at the APC Web site.
&RGH 'HVFULSWLRQ 6HYHULW\
0x0008 System: Password changed. Informational
0x0109 UPS: Switched to battery backup power. Warning
0x030F Environment: High humidity threshold violation on probe 1. Severe