Filter
Top Products
Network Management Card User’s Guide 21
Network Menu
Menu Options FRQWLQXHG
SNMP
An
Access
option (the
Settings
option in the Control Console) enables
(by default) or disables SNMP. When SNMP is enabled, the
Access
Control
settings allow you to control how each of the four available
SNMP channels is used.
Note: For information about how to define the up to four
NMS
s which
will serve as trap receivers, see Trap Receivers on page 49;
for more information about how to use SNMP to manage a UPS
or an Environmental Monitor, see the PowerNet® SNMP
Management Information Base (MIB) Reference Guide on the
APC Network Management Card utility CD (.\doc\mibguide.pdf).
Email
You use this option to define two SMTP settings (
SMTP Server
and
From Address
) used by the Management Card’s Email feature.
For more information about these settings, see SMTP settings on
page 50; for more information about Email as it relates to the
Management Card, see Email Feature on page 50.
6HWWLQJ 'HILQLWLRQ
Community
Name
This setting defines the password (maximum of 15 characters)
which an NMS that is defined by the
NMS IP
setting below uses
to access the channel.
NMS IP
Limits access to the NMS or NMSs specified by the format used
for the IP address.
•
159.215.12.1
allows only the NMS with that specific IP address
to have access.
•
159.215.12.255
allows access for any NMS on the 159.215.12
segment.
•
159.215.255.255
allows access for any NMS on the 159.215
segment.
•
159.255.255.255
allows access for any NMS on the 159
segment.
•
0.0.0.0
or
255.255.255.255
allows access for any NMS.
Access Type
Selects how the
NMS
defined by the
NMS IP
setting can use the
channel, when that
NMS
uses the correct
Community Name
.
Read
The
NMS
can use GETs at any time, but it can never
use SETs.
Write
The
NMS
can use GETs at any time, and can use
SETs when no one is logged into either the Control
Console or Web Interface.
Write+
The
NMS
can use GETs and SETs at any time, even
when someone is logged into the Control Console or
Web Interface.
Disabled
The NMS cannot use GETs or SETs.