Filter
Top Products
Network Management Card User’s Guide 24
System Menu
Option Settings FRQWLQXHG
Date & Time
Use this option to set the time and date used by the Management Card.
The option displays the current settings, and allows you to change those
settings manually, or through a Network Time Protocol (NTP) Server.
Manual. Use this option (
Set Manually
in the Web Interface) to set the
Date
and
Time
settings for the Management Card.
Note: An
Apply Local Computer Time to Network Management Card
option, which is available in the Web Interface only, sets these
values to match the date and time settings of the computer you
are using to access the Web Interface.
Network Time Protocol (NTP) . Use this option (
Synchronize with
Network Time Protocol (NTP) Server
in the Web Interface) to have an
NTP Server automatically update the
Date
and
Time
settings for the
Management Card.
Note: The Control Console has a
NTP Client
option that enables or
disables (the default) the NTP Server updates, while in the Web
Interface, selecting the
Set Manually
option disables the
updates.
&RQWLQXHGRQQH[WSDJH
6HWWLQJ 'HILQLWLRQ
Primary NTP Server
Identifies the IP address of the primary NTP server.
Secondary NTP Server
Identifies the IP address of the secondary NTP server,
when a secondary server is available.
GMT Offset (TIme Zone)
Defines the offset to be used from Greenwich Mean
TIme (GMT) based on the Management Card’s time
zone.
Update Interval
Defines how often, in weeks, the Management Card
will access the NTP Server for an update (
1
week
minimum,
52
weeks maximum).