Filter
Top Products
Network Management Card User’s Guide 58
Troubleshooting
Management Card FRQWLQXHG
SNMP issues
The following table describes known
SNMP
problems.
3UREOHP 6ROXWLRQ
Unable to perform a GET
• Verify the read (GET) community name.
• Use the Control Console or Web Interface to ensure
that the NMS
has access. See SNMP on page 21.
Unable to perform a SET
• Verify the read/write (SET) community name.
• Use the Control Console or Web Interface to ensure
that the
NMS
has write (SET) access. See SNMP on
page 21.
Unable to receive traps at
the NMS
Query the
mconfigTrapReceiverTable
PowerNet
MIB
OID
to see if the
NMS
IP
address is listed correctly, and
the community name defined for the
NMS
matches the
community name in the table. If not, use SETs to the
mconfigTrapReceiverTable
OID
s, or use the Control
Console or Web Interface to correct the trap receiver
definition problem. See SNMP on page 21.
Traps received at an NMS
are not identified
See your
NMS
documentation to verify that the traps
are properly integrated in the alarm/trap database.