Filter
Top Products
Network Management Card User’s Guide 23
System Menu
Option Settings
User Manager
Use this option to define the access values shared by the Control
Console and the Web Interface.
Identification
Use this option to define the System
Name
,
Location
, and
Contact
values used by the Management Card’s SNMP agent. The option’s
settings provide the values used for the MIB-II
sysName
,
sysContact
,
and
sysLocation
Object Identifications (
OIDs
).
Note: For more information about the MIB-II OIDs, see the
PowerNet® SNMP Management Information Base (MIB)
Reference Guide provided on the APC Network Management
Card utility CD (./doc/mibguide.pdf).
&RQWLQXHGRQQH[WSDJH
6HWWLQJ 'HILQLWLRQ
Auto Logout
Defines how much inactivity can occur, measured in minutes
(
3
, by default), before a user is automatically logged out.
Authentication
(Control Console
only)
Only one setting,
Basic
, is available. The
Basic
setting causes
the Web Interface to use standard
HTTP
1.1
login (base
64
-
encoded passwords).
Administrator
and
Device Manager User
User Name
Defines the case-sensitive name (maximum of 10 characters)
used to log in at the Control Console or Web Interface (
apc
, by
default, for
Administrator
, and device, by default, for
Device
Manager User
).
Password
Defines the case-sensitive password (maximum of 10
characters) used to log in at the Control Console or Web
Interface (
apc
is the default for both
Password
settings).
Authentication
Phrase
Not used at this time.