Filter
Top Products
Network Management Card User’s Guide 47
Events Menu
Event Actions (Web Interface only)
Overview
The
Actions
option is available only in the Web Interface’s
Events
menu. This option allows you to do the following:
• You can select which actions will occur for events that have a
specified severity level:
–
Event Log
selects which severity levels will cause an event
to be recorded in the event log. For more information about
this action, see Event Log action on page 48.
–
SNMP Traps
selects which severity levels will cause SNMP
traps to be generated. For more information about this
action, see SNMP Traps action on page 48.
–
Email
selects which severity levels will cause Email
notifications to be sent. For more information about this
action, see Email action on page 48.
• You can click
Details
to do access a complete list of the
Management Card (System events), UPS, and Environmental
Monitor (Environment events) that can occur, and then edit the
actions that will occur for an individual event, as described in
How to Configure Individual Events on page 53.
Severity levels
With the exception of some Management Card (System) events that do
not have a severity level assigned, events are assigned a default
severity level based on the seriousness of the event.
• Informational: Indicates an event that requires no action, such
as a notification of a return from an abnormal condition.
• Warning: Indicates an event that may need to be addressed
should the condition continue, but which does not require
immediate attention.
• Severe: Indicates an event that requires immediate attention.
Unless resolved, UPS and Management Card severe events
can cause incorrect operation of the UPS or its supported
equipment, or can result in the loss of UPS protection during a
power failure. Environmental Monitor severe events warn of
abnormal environmental conditions or possible security
violations.
&RQWLQXHGRQQH[WSDJH