Filter
Top Products
Network Management Card User’s Guide 27
Device Manager Menus
UPS Status
Overview
The
Status
options provide access to the information described in the
following sections:
• Detailed UPS Status on this page
• Utility Voltage Status on page 28
• Output Power Status on page 29
• Fault Tolerance (Symmetra or Symmetra 3 Phase UPS) on
page 30
• Battery on page 30
Note: No description is provided for the self-explanatory
About
UPS
status fields.
For a Silcon DP300E series UPS, the “Status of UPS” page in the Web
Interface includes the
View the refreshing status page
hyperlink
described in Configure the Multiple/Parallel UPS IP Address and
Monitor Name (Silcon DP300E series UPS only) on page 37.
Detailed UPS
Status
The Web Interface reports UPS status information on the “Status for
UPS” page that is accessed by the
Status
option in the
UPS
menu:
• The UPS Status fields includes information about the following:
– The current status of the UPS.
Note: The current UPS status also appears on the
“Summary”, “Control”, and “Diagnostics” pages.
– The reason for the last transfer to battery power at the
UPS.
– The internal temperature of the
UPS
.
– The runtime that is currently available to the UPS.
• The values described in Utility Voltage Status on page 28,
Output Power Status on page 29, and Battery on page 30.
• The Fault tolerance parameters described in Fault Tolerance
(Symmetra or Symmetra 3 Phase UPS) on page 30.
The Control Console, which reports some UPS status information above
the
UPS
menu, has a
Detailed Status
(Smart-UPS or Matrix-UPS) or
Detailed UPS Information
(Symmetra, Symmetra 3 Phase, or Silcon
DP300E series UPS) option you use to access all UPS status
information. In addition, for all Symmetra UPS models, a
Faults &
Alarms
option in the Control Console’s
UPS
menu accesses
descriptions of any faults or alarms reported as part of the
UPS
status.
Note: A Silcon DP300E series UPS can report a non-specific fault for
about 50 different conditions. Access the UPS Keyboard for
details when a non-specific fault is reported.
For information about how to access a list of the
UPS
events that can be
reported as part of the
UPS
status, see “Event List” page on page 53.