Filter
Top Products
Network Management Card User’s Guide 43
Device Manager Menus
Environment Menu
Overview
The
Status
option (Web Interface) and the
Threshold and Contact
Details
option (Control Console) provide access to the status
information about the probes and contacts. The
Status
option in the
Web Interface also accesses the firmware information for the
Environmental Monitor. In the Control Console, the firmware information
is accessed through the
About Environmental Monitor
option.
The
Configuration
option in the Web Interface provides access to all of
the configuration settings for the probes and contacts. In the Control
Console, individual options (
Trap Thresholds Probe 1
,
Trap Thresholds
Probe 2
, and
Contact Settings
) are used.
Probe status
These fields report on the status for each probe.
Note: For information about the threshold values cited in the table,
see Probe settings below.
Contact status
Reports the name of each contact alarm, and whether or not the
contact’s alarm condition exists:
Yes
,
No
, or
Disabled
. For information
about the contact alarm settings, see Contact settings below.
Probe settings
You use the
Setting
fields to define the temperature or humidity values
you want to use for the thresholds, and the
Trap
fields to
Enable
or
Disable
each threshold.
Contact
settings
You use the
Name
fields to define the name you want to use for the
contact alarms, and the
Trap
fields to
Enable
or
Disable
each alarm.
6WDWXV)LHOG 'HILQLWLRQ
Temperature
Identifies the ambient temperature sensed by the probe.
High
or
Low
Temperature
Violation
Identifies whether or not the current ambient temperature
violates the probe’s temperature threshold settings:
Yes
,
No
, or
Disabled
.
Humidity
Identifies whether the relative humidity sensed by the probe.
High
or
Low
Humidity Violation
Identifies whether or not the current relative humidity violates
the probe’s humidity threshold settings:
Yes
,
No
, or
Disabled
.