APC VS 100 Power Supply User Manual


 
Magnum VS –48 Vdc User’s Manual Page 29
If the keypad is not pressed for approximately 2 minutes the display will revert to the Status
display and the backlight will extinguish. It will also clear any PIN that may have been entered.
Pressing any key during this mode will cause the display of the Main Menu and permit
navigation among the menus.
Figure 6.3-1 Controller with Display
6.4. Operation using Local Display and Keypad Interface
The location, description, and factory programmed default value for each of the Magnum VS
system parameters is found in the table below. The menu location of a parameter screen is
shown in brackets, for example: [STATUS/RECT/Rect xx]. This table is organized
alphabetically by parameter name.