Filter
Top Products
MacBook (13-inch) Take Apart — Bluetooth Board 136
Replacement Note: Without straining the cable, slide a black stick underneath the board
sleeve, and press the connector to secure it to the board.
Replacement Note: Connect the Bluetooth-to-logic board cable rst before adhering the
board to the bottom case. Then install the Bluetooth antenna cable, and make sure the cable
exits toward the upper right corner of the bottom case.
Replacement Note: Make sure the upper right corner of the board ts over the locator pin.
To secure the board, press only the right corners of the board near the locator pin and the
Bluetooth antenna cable.
Install the replacement Bluetooth board, and reassemble and test the computer.
Replacement Note: If installing a new Bluetooth board, remove any remaining adhesive
from the bottom case. Then remove the adhesive backing from the new board before
installing it in the bottom case.
5.