Filter
Top Products
MacBook (13-inch) Additional Procedures — Mitsumi Keycaps — 318
7. Make sure the dual-hinge mechanism on both ends of the keyboard well is fully at and
pressed as far apart they will go. Then lower the keycap so that the clips align with the smaller
stabilizer bar and the center of the hinge mechanism.
8. Lower the key down.
9. Press the major contact points, and then press over the entire key to hear it snap into place.
10. Check the Space bar key from all angles to make sure it is uniformly at. Press and release one
corner of the key. If it is installed correctly, the opposite corner should move at the same level.