Filter
Top Products
Page 1-16
Chapter 1 — Quick Start
Placing the Bridge on a Desktop
1
Peel the protective strips from the self-adhesive feet and
apply the feet in the four corners of the base of the unit.
2
Place the unit on a flat, stable surface.
Wall or rack mounting the Bridge
1
Mark the desired location on the wall or rack (see Appen-
dix B, “Technical Specifications” for unit physical dimen-
sions).
2
Fasten the brackets to the rack, using the hardware pro-
vided, or wall using screws that are appropriate for the
type of wall on which you are mounting the AsantéBridge.
3
Place the unit on the brackets (get an assistant to hold it in
place if necessary), and fasten the hub to the brackets,
using the screws provided.
Wall- and rack-mounting positions are illustrated in the figure
below.
Figure 1-9 Rack-mounting the AsantéBridge
❖
Note: To wall mount, rotate the mounting brackets 90°
and use the appropriate screws to fasten to the wall.
❖
ASANTE
RESET
PWR CPU
NMP MSG
UTILIZATION
%
PARTITION
LINK/RECEIVE
SNMP
1
1
10BASE-T PORTS
Asante´Hub 1012
1 3 5 10 20 30 50 65+ UPLINK
2 3 4 5 6 7 8 9 10 11 12
234 5678 910 11 12
COLLISION
%
13510+
Late Collision
Misaligned CRC
Runts/Fragments
Short Event/Missing SFD
50
STATUSSTANDBYACTIVE
50
RCV FWD COL
50
BRIDGE
RCV FWD COL
BRIDGE