Filter
Top Products
Page 3-19
Configuration Menu System
3
Press return to set the new value.
4
Repeat steps 1-3 for any other fields you want to modify.
5
Highlight the COMMUNITY STRING field for the IP
address you want and press
return to open the data entry
bar.
6
Enter the new string; press return to set the value.
7
Repeat steps 5-6 for the other community string fields.
8
Highlight the STATUS field you want to modify.
9
This is a toggle. Press the spacebar or return to switch.
10
Again using the arrow keys, highlight the SNMP Authenti-
cation Trap
field.
11
This is also a toggle. Press the spacebar or return to switch
between
Enabled and Disabled.
12
Enter control-z to return to the SNMP Agent Parameters
Menu
.
SNMP Community Name Table
Figure 3-12 SNMP Community Name Table