Filter
Top Products
Page B-2
Appendix B — Technical Specifications
This appendix describes the technical features of the
AsantéBridge 1012.
Standards Supported:
IEEE 802.3 Ethernet specifications for thick (10Base5), thin
(10Base2), and unshielded twisted pair (10BaseT) media
IEEE 802.1d specifications for transparent bridging with spanning
tree implementation
Data Rate: 10 Mbps
Maximum Cable Distances:
10BaseT (UTP): 100m (328 ft.)
10Base2 (thin): 200m (656 ft.)
10Base5 (thick): 50m (163 ft.)
Ports:
13 Unshielded Twisted Pair (UTP device ports)
1 Autoswitch 3-in-1 Uplink with three physical port options:
1 Attachment Unit Interface (AUI)
1 BNC Thin Ethernet
2 RJ-45
1 AUI for external bridge port
1 internal bridge port (connected internally to the hub; the hub
itself is the internal bridge port)
LEDs:
14 to indicate Link Integrity Status
14 to indicate Autopartitioning Status
8 to show Hub Bandwidth Utilization
4 to show Collision Percentage
1 to show Late Collision
1 to show Alignment/CRC Errors
1 to show Runt/Fragmented Packets
1 to show Short Event/Missing SFD
1 to show CPU Activity
1 to show Message Waiting
1 to show SNMP Option present
1 to show Power on/off
1 to show Uplink Partition Status (rear panel)