Filter
Top Products
Page 3-7
Configuration Menu System
The main configuration menu, accessed only after entering a pass-
word, provides submenus and commands for:
Figure 3-4 Main Configuration Menu
❏
Checking and updating system information (text data
contained in bridge memory)
❏ Defining a new password for the Configuration Menu
❏ Checking and updating the SNMP agent parameters
❏ Displaying and modifying the hub Out-of-Band Parame-
ters Menu
❏ Accessing the Bridge Parameters Menu
❏ Resetting the bridge
Accessing the Configuration Menu system
You must be at the main Local Management Menu to enter the
menu system.
1
Use the arrow keys to select Configuration Menu and then
press
return.
The bridge prompts you for a password.
2
Enter the password defined for this bridge.
The default password, set at the factory, is
Asanté.
Press
return after entering your password.
This opens the main
Configuration Menu.
3
The first five menu entries are submenus. Use the Up/
Down arrow
keys to move the selection bar to the menu
item you want, then press
return to select it.
Configuration
Menu System