Filter
Top Products
Page 3-12
Chapter 3 — AsantéBridge 1012 Local Management
TCP/IP Parameters Menu
The IP address, subnet mask and default router IP address for the
bridge and hub are set from this menu.
Figure 3-8 TCP/IP Parameters Menu
❖
Important: You should understand how IP addressing
works before you attempt to modify any of these param-
eters.
❖
The IP address, subnet mask, and default router address currently
stored in bridge memory are shown in the
CURRENT SETTING
field. These data are retrieved from the bridge when the menu is
called from the
SNMP Agent Parameters Menu.
To use the TCP/IP Parameters menu, do the following:
1
Use the Up/Down arrows to select the parameter you
want to modify, then press
return to select it.
2
Press control-u to erase the current data and enter the new
IP address or mask.
3
Press return.
4
Repeat 1-3 for the next field, if required.