Filter
Top Products
Page 3-35
Configuration Menu System
❏ Status enables or disables the filtering function for this
range of addresses.
To use the Bridge Filtering Table, do the following:
1
Use the arrow keys to highlight the LO DST address field
and press
return.
The current value in the field is displayed in the data entry
bar at the bottom of the window.
2
Enter control-u to clear the entry bar and enter the new
lower range limit for packet destination addresses for this
parameter set.
Press
return when the entry is correct.
3
Select the HI DST address field and press return.
4
Enter the new upper range limit for packet destination
addresses for the parameter set.
Press return when the entry is correct.
5
Select the LO SRC Address field and enter a new lower
range limit for packet source addresses.
Press return when the entry is correct.
6
Select the HI SRC Address field and enter a new upper
range limit for packet destination addresses.
Press return when the entry is correct.
7
Select the LO Type field and define the lower range limit
for packet types (protocols).
8
Select the HI Type field and define the upper range limit for
packet types.
9
Select the Status field and use the spacebar to toggle it
ON or OFF.
10
Repeat steps 1-9 for each additional parameter set in the
table.