Filter
Top Products
Page 3-3
Bridge Diagnostics
The AsantéBridge 1012 is equipped with on-board diagnostics that
run when the bridge is powered on (cold start) or when reset,
either from the front panel or with the
Reset system command
from the local management
Configuration Menu.
The diagnostics take a few seconds and are designed to check the
overall health of the bridge and hub hardware and internal soft-
ware. As the diagnostics run, the VT100 window will scroll, listing
the separate tests and the results. Figure 3-1 shows a sample
screen.
If one of the diagnostics should fail or detect a system malfunc-
tion, an error message will be displayed in the window. Write
down what it says and call Asanté Technical Support for help.
Figure 3-1 AsantéBridge 1012 Diagnostics
After the diagnostics are completed, the window scrolls up and
shows the normal AsantéBridge 1012 local management menu.
Bridge
Diagnostics