Filter
Top Products
Page 3-16
Chapter 3 — AsantéBridge 1012 Local Management
6
Enter control-z to return to the SNMP Agent Parameter
Menu
without taking any action.
If the software download process fails and you enter a
control-c
from the VT100, the AsantéBridge opens this window.
Figure 3-10 System Update Status Window
This window gives the currently defined SNMP and software
update parameters. Check them to make sure you have specified
the correct IP address for the boot server and provided the cor-
rect file name for the configuration file. Only two fields are active
in this window: the
Software Update:, and EXECUTE BOOT-
STRAP SEQUENCE
.
The window opens with the
Software Update: field highlighted.
This field tells the bridge to either continue with the software
update process or to abort it and reload the existing image soft-
ware currently residing in the FLASH EPROM.
1
Change the Software Update: field by pressing return.
This makes the field toggle between
DISABLED and
ENABLED
.
2
Use the arrow keys to move the highlight bar to the EXE-
CUTE BOOTSTRAP SEQUENCE
field.
Press
return to execute the command.