Filter
Top Products
Console Management
Page 5-14
Table 5-5 Bootstrap Parameter Settings
Setting Description
Set Load Mode to
Local
Executes the software image file from the
switch’s internal flash memory (default
setting).
Important: This is the switch’s default setting.
Set Load Mode to
Remote
Loads a new software image file from a server
on the network.
Important: To use this option, you must select
BootP-TFTP or TFTP as the Boot Mode.
Set Boot Mode to
Bootp-tftp
Sets the IntraSwitch to request an IP address
from a BootP server and download the
software image file through TFTP.
Important: To use this option, the switch’s IP
address must be set to 0.0.0.0 and the Load
Mode must be set to Remote.
Set Boot Mode to TFTP Sets the IntraSwitch to only download the
software image file through TFTP (an IP
address is not requested).
Important: To use this option, the switch must
already have an assigned IP address and the
Load Mode must be set to Remote.
Set Boot Server IP
Address
Sets the IP address of the remote server
providing BootP/TFTP capabilities on your
network.
Set Boot File Name Sets the software image file name and
network path.