Filter
Top Products
ASUS Terminator 1 C3 barebone systemASUS Terminator 1 C3 barebone system
ASUS Terminator 1 C3 barebone systemASUS Terminator 1 C3 barebone system
ASUS Terminator 1 C3 barebone system
2-92-9
2-92-9
2-9
Follow these steps to install a PCI
card.
1. Place the chassis on its side.
2. Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
3. Press the card firmly until it is
properly seated in the slot.
4. Secure the card to the metal
bracket on the chassis with a
bracket screw.
PCI slot (PCI1)PCI slot (PCI1)
PCI slot (PCI1)PCI slot (PCI1)
PCI slot (PCI1)
Metal bracketMetal bracket
Metal bracketMetal bracket
Metal bracket
2.6.22.6.2
2.6.22.6.2
2.6.2
Expansion card installationExpansion card installation
Expansion card installationExpansion card installation
Expansion card installation
2.6.32.6.3
2.6.32.6.3
2.6.3
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Install the software drivers for the expansion card.