Filter
Top Products
2-142-14
2-142-14
2-14
Chapter 2: Basic InstallationChapter 2: Basic Installation
Chapter 2: Basic InstallationChapter 2: Basic Installation
Chapter 2: Basic Installation
5. Connect a power cable from
the power supply to the
power connector at the back
of the HDD. Use the cable with
the white connector.
6. Connect one end of the IDE
hard disk ribbon cable to the
IDE interface at the back of
the HDD, matching the red
stripe on the cable with Pin 1
on the IDE interface.
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1
IDE ribbon cableIDE ribbon cable
IDE ribbon cableIDE ribbon cable
IDE ribbon cable
Power cablePower cable
Power cablePower cable
Power cable
7. Connect the other end of the
IDE ribbon cable to the primary
IDE connector (blue connector
labeled PRI_IDE) on the
motherboard.
Primary IDE connectorPrimary IDE connector
Primary IDE connectorPrimary IDE connector
Primary IDE connector
(PRI_IDE)(PRI_IDE)
(PRI_IDE)(PRI_IDE)
(PRI_IDE)