Filter
Top Products
ASUS Terminator 1 C3 barebone systemASUS Terminator 1 C3 barebone system
ASUS Terminator 1 C3 barebone systemASUS Terminator 1 C3 barebone system
ASUS Terminator 1 C3 barebone system
2-132-13
2-132-13
2-13
2.8 Installing a hard disk drive
The chassis has one 3.5-inch hard disk drive (HDD) bay right under the
5.25-inch bay. The following figures show the internal and external views of
the HDD bay location.
5.25-inch Drive bay5.25-inch Drive bay
5.25-inch Drive bay5.25-inch Drive bay
5.25-inch Drive bay
3.5-inch HDD drive bay3.5-inch HDD drive bay
3.5-inch HDD drive bay3.5-inch HDD drive bay
3.5-inch HDD drive bay
Internal viewInternal view
Internal viewInternal view
Internal view
External viewExternal view
External viewExternal view
External view
Follow these steps to install an IDE
HDD.
1. Place the chassis upright.
2. With the HDD label side up,
carefully insert the drive into
the 3.5-inch bay.
HDD label sideHDD label side
HDD label sideHDD label side
HDD label side
3. Push the drive into the bay
until its screw holes align with
the holes on the bay marked
HDD.
4. Drive screws into the HDD
screw holes.
HDD screw holes