Filter
Top Products
ASUS Terminator T1 C3 barebone systemASUS Terminator T1 C3 barebone system
ASUS Terminator T1 C3 barebone systemASUS Terminator T1 C3 barebone system
ASUS Terminator T1 C3 barebone system
4-94-9
4-94-9
4-9
8.8.
8.8.
8.
Serial ATA connectors (7-pin SATA1 [black],Serial ATA connectors (7-pin SATA1 [black],
Serial ATA connectors (7-pin SATA1 [black],Serial ATA connectors (7-pin SATA1 [black],
Serial ATA connectors (7-pin SATA1 [black],
SATA2 [black])SATA2 [black])
SATA2 [black])SATA2 [black])
SATA2 [black])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
You must install Windows
®
2000 Service Pack 4 or the Windows
®
XP
Service Pack 1 before using Serial ATA hard disk drives. The Serial ATA
RAID feature (RAID 0/RAID 1) is available only if you are using Windows
®
2000/XP.
C3V
®
C3V SATA connectors
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
9.9.
9.9.
9.
Digital audio connector (4-1 pin SPDIF_OUT)Digital audio connector (4-1 pin SPDIF_OUT)
Digital audio connector (4-1 pin SPDIF_OUT)Digital audio connector (4-1 pin SPDIF_OUT)
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.
The S/PDIF module is purchased separately.
C3V
®
C3V Digital audio connector
+5V
SPDIFOUT
GND
SPDIF_OUT