Filter
Top Products
2-122-12
2-122-12
2-12
Chapter 2: Basic InstallationChapter 2: Basic Installation
Chapter 2: Basic InstallationChapter 2: Basic Installation
Chapter 2: Basic Installation
5. Connect a power cable from
the power supply to the
power connector at the back
of the optical drive. Use the
cable with the white
connector.
6. Connect one end of the IDE
ribbon cable to the IDE
interface at the back of the
CD-ROM, matching the red
stripe on the cable with Pin 1
on the IDE interface.
7. Connect one end of the
CD-ROM audio cable to the
4-pin connector at the back of
the CD-ROM.
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1
IDE ribbon cableIDE ribbon cable
IDE ribbon cableIDE ribbon cable
IDE ribbon cable
Power cablePower cable
Power cablePower cable
Power cable
Optical drive audio cableOptical drive audio cable
Optical drive audio cableOptical drive audio cable
Optical drive audio cable
9. Connect the other end of the
audio cable to the black 4-pin
connector labeled CD on the
motherboard.
CD-ROM connector CD-ROM connector
CD-ROM connector CD-ROM connector
CD-ROM connector
(CD)(CD)
(CD)(CD)
(CD)
SecondarySecondary
SecondarySecondary
Secondary
IDE connectorIDE connector
IDE connectorIDE connector
IDE connector
(SEC_IDE)(SEC_IDE)
(SEC_IDE)(SEC_IDE)
(SEC_IDE)
8. Connect the other end of the
IDE ribbon cable to the
secondary IDE connector
(black connector labeled
SEC_IDE) on the motherboard.