Filter
Top Products
3-16
Chapter 3: BIOS setup
Chapter 3
VRM Spread Spectrum [Disabled]
This item allows to enhance the system stability. Conguration options: [Disabled]
[Enabled]
CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
Conguration options: [Auto] [Standard] [Optimized] [Extreme]
DO NOT remove the thermal module when setting this item to [Power Phase Response].
The thermal conditions should be monitored.
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe] Select to set the VRM thermal balance mode.
[Extreme] Select to set the VRM current balance mode.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
This item provides a total power range for CPU overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Conguration options: [Auto] [100%] [110%] [120%] [130%] [140%]
CPU Input Boot Voltage [Auto]
VCCIN for the CPU right at boot.
Conguration options: [Auto] [0.800] – [2.440V]
DRAM Current Capability [100%]
This item adjusts the total power range for DRAM overclocking. A higher value
provides a wider power total range and extends the overclocking frequency range
simultaneously.
Conguration options: [100%] [110%] [120%] [130%]
DRAM Switching Frequency [Auto]
This item affects the overclocking range and the system stability.
Conguration options: [Auto] [Manual]
DRAM Power Phase Control [Auto]
This item allows you to set to the optimized phase tuning prole or to the full phase
mode.
Conguration options: [Auto] [Optimized] [Extreme]