Filter
Top Products
3-42
Chapter 3: BIOS setup
Chapter 3
3.6.8 APM Configuration
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss [Power Off]
[Power Off] The system goes into OFF state after an AC power loss.
[Power On] The system goes into ON state after an AC power loss.
[Last State] The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Power On By PCI-E [Disabled]
[Disabled] Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel
®
device or other installed PCIE LAN devices.
[Enabled] Enables the PCIE devices to generate a wake-on-LAN feature of the PCIE
LAN devices.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] Generates a wake event and congure the real-time clock (RTC) alarm
date.