Asus E9394 Computer Hardware User Manual


  Open as PDF
of 224
 
4-18
Chapter 4: Software support
Chapter 4
USB Charger+
USBCharger+allowsyoutoquick-chargeyourportableUSBdevicesevenifyourcomputer
isoff,insleepmode,orinhibernatemode.
BeforeusingUSBCharger+,ensuretodisabletheErPReadyitemintheBIOS.Todo
this,gotoAdvanced > APM > ErP ReadyintheAdvancedmodethensetthisitemto
[Disabled].
USBCharger+isavailableonlyinselectedmotherboardmodels.
Launching USB Charger+
TolaunchUSBCharger+,clickortap onthetop-rightcorneroftheAISuite3main
menu,thenselect USB Charger+.
Using USB Charger+
EnsuretoconnectyourUSBdeviceintotheUSBportthatsupportsthisutility.Refertothe
Rear I/O connectionsectionofthisuserguideformoredetails.
• USBCharger+doesnotsupportUSBhubs,USBextensioncables,andgenericUSB
cables.
• USBCharger+maynotrecognizesomeASUSdevicesduetovaryingdesign.
Click or tap to
apply the settings
Click or tap to
refresh the list
Click or tap to
discard the settings
Click or tap to select the type of USB device
that you wish to charge when the system is off
 previous next