Filter
Top Products
ASUS PR-DLS533 motherboard user guide
5-27
C. Existing System Installation
This procedure installs or upgrades the SYMMPI.SYS drivers onto an
existing Windows XP system.
NOTE: When a LSI Logic SCSI or Fibre Channel adapter is added to an
existing system installation, the new adapter is automatically detected
at the next reboot. When the Device Driver Wizard appears at boot,
click on the Next button and continue at step 8 below.
1. Boot Windows XP and logon as a user that has Administrator
privileges.
2. Click on the Start button, then right-click on the My Computer entry in
the menu.
3. Click on the Properties selection.
4. Click on the Hardware tab, and then the Device Manager button.
5. Click the "+" to the left of the SCSI and RAID controllers line. Find
the adapter desired for the driver upgrade and double-click the entry.
Click on the Driver tab.
6. Information on the currently installed driver is displayed, and
additional driver details can be viewed by clicking the “Driver Details”
button.
7. Click on the “Update Driver” button to update the existing driver. The
Hardware Update Wizard begins.
8. Click on the “Install from a list or specific location...” button to select it,
then click on the Next button.
9. Click on the “Don’t search, I will choose the driver to install.” button to
select it, then click on the Next button.
10. Click on the “Have Disk” button and type the path to the driver, or
click on the Browse button. Drivers for 32-bit systems will be in the
“32_bit” directory and drivers for 64-bit systems will be in the 64-bit
directory. After the path to the driver has been established, click the
OK button.
11. Select the driver from the list and click on the Next button.
12. Click on the Next button again to start the driver update.
In some cases, a message will display saying that this driver has not
passed logo testing. This message informs you that a nonsigned
driver is being installed.