Filter
Top Products
5-42
Chapter 5: Driver installation
5. The system prompts for the host adapter that supports the CD-ROM
drive. Type the correct host adapter number and press Enter.
If an additional LSI Logic host adapter is being added to the SCO
UNIX kernel, the system may prompt if you want to update the link-kit
(add another host adapter). Type y and press Enter. If you entered
the host adapter number incorrectly, type n, and press Enter. The
system then prompts for the host adapter identifier of the preceding
step.
6. With SCO OpenServer 5.0.6a, the system prompts for the bus
number of the CD-ROM. Since LSI Logic host adapters support only
one bus per adapter, press Enter to get the default of zero, or type 0
(zero) and press Enter.
7. The system prompts for the ID of the CD-ROM Drive. Type the ID
number and press Enter.
8. The system prompts for the LUN of the CD-ROM drive. Type the
desired LUN and press Enter, or press Enter for the default value of
zero.
9. The system prompts to update the Configuration file. Type y and
press Enter. A prompt appears to configure a CD-ROM/TAPE
installation device. Unless this is desired, type n and press Enter.
A prompt appears to add a High-Sierra file system. Type y and press
Enter. The system displays the High Sierra/ISO9600 file system
Configuration Program menu. Select option 1 to add High-Sierra and
press Enter. The system updates the configuration file and returns to
the CD-ROM Configuration Program menu. Type q and press Enter
to terminate the CD-ROM Configuration Program menu.
10. A prompt appears to create a new kernel. Type y if this is the last
device to be added, or type n if additional devices are to be added.
Go to step 6, "Rebuilding the Kernel," if you replied y; return to step 3
if you replied n.